ΧΟΝΔΡΙΚΗ - ΛΙΑΝΙΚΗ ΠΩΛΗΣΗ

The instructions below apply to all products applied to porous surfaces: such as wood, stone, fabric, leather, cement, etc. They refer to the following materials:BRM Nano-Stone, BRM Nano-Wood, BRM Nano-Textile, BRM Nano Premium-Textile, BRM Ultracoatwhile for theNano-Leatherread the related footnote.

 

INSTRUCTIONS

1. Surfaces must be clean and dry.

2. The material is used as is without dilution with water (or whatever) because it will lose all its properties

3. The recommended method of application is spraying. If the surface is large we can use a paint gun or a spray pump as long as we make sure that the container is clean of any foreign body.

4. Spray from a distance of about 30 cm evenly  until the surfaces feel slightly fresh.

5. Let the material dry.

6. Do not wash or scrub the surface for about 24 hours

7. We then test the effectiveness with a little water.

8. Valid only to theNano-Leather: Because the surfaces on which it is applied (mainly smooth skin) may be less absorbent, we apply it with a cloth in slow circular movements. Shake the container well before each application. 

​

Clarifications:

- All the above products (except Nano-Leather, see instruction 8) are intended for surfaces that can absorb deionized water, which is their main ingredient.

- If a surface is already waterproofed due to composition (eg synthetic plastic, nylon fabric, crystallized marble, etc.) or previous use of another waterproofing agent it will not be able to absorb water sufficiently -carrier of the nanoparticles and the results will be poor. 

- The products are safe for the user and the environment. As a precaution, the standard protective measures are recommended:  Use of gloves, breathing mask and glasses

​